-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueBreaking High-speed Material Constraints
Do you need specialty materials for your high-speed designs? Maybe not. Improvements in resins mean designers of high-speed boards can sometimes use traditional laminate systems. Learn more in this issue.
Level Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Estimated reading time: 3 minutes
Fresh PCB Concepts: Mitigating the Increasing Prices of PCBs
By now, you might have noticed that the cost of PCBs is increasing. What’s worse is that there are also supply chain issues causing additional delays on PCBs. You can’t redesign every board in order to reduce cost, so instead, try these tips to help you reduce manufacturing costs.
There are many articles that have explained the reasoning for the increased pricing, including this I-Connect007 article. We are going to focus on how you can respond, and develop some understanding of the factors driving this increased price and lead time.
One of the biggest impacts to a board’s lead time is the callout of a specific material in the fab notes. Customers are sometimes shocked when they find out boards can’t even start manufacturing until the factory can order the hard-to-find material. Why is that?
Most likely it’s because the fab notes call for a specific material that isn’t widely available, or is primarily common to a local region. Not only does it take time for a factory to source and receive the material, but it also often means this material will come at a premium price. In previous years it was easy to overlook the added cost of material, but now it’s time to take another look at how changes to material can save both time and money.
When assessing material, the first thing an engineer should do is assess the end equipment application. You should think twice before changing material on medical and RF applications, but a majority of boards aren’t going into high performance or harsh environment electronic products. Two magic words—“or equivalent”—can unlock availability of material. This means that the factory is allowed to use an IPC identified equivalent to the material choice you called out. This can often be confirmed by checking the material datasheet, but essentially it comes down to having strong relationships with the factory in order to have both the control and the knowledge that you are risking quality over a shorter lead time and possibly a lower price.
Another hint about the material: look at the Tg requirement. Understanding your reflow/soldering cycles for your end application means that you can chose the right Tg requirement for the PCB and save the extra material cost.
In addition to the material, you should check into the copper weight used on your board. Increasing copper weight is great way to increase current carrying capacity, but also comes at a premium. We’ve noticed that many boards designed with 2 oz. copper don’t actually need the current carrying capacity. These boards could have been designed with a lesser copper weight, thus reducing both cost and availability without hampering the final application.
If you’re adding extra copper weight because of reliability, consider that if you’re working with a quality partner for your PCBs, you shouldn’t have to worry about inconsistencies in copper thickness. At NCAB, for example, we always plate vias to Class 3 CU thickness in holes, as the vias are usually are the weakest link.
We also recommend that you consider the surface finish your boards have. Did you know that immersion gold (ENIG) surface finish can increase your PCB cost by approximately 20% on otherwise standard 2L boards? This is a way to save significant costs on your PCBs. There are cost-effective options like lead-free HASL that can be used instead for some PCBs. Here are a few indicators that you can use lead-free HASL (LF HAL) instead of ENIG.
- Consider the characteristics of the ENIG finish. ENIG has an electroless layer of nickel followed by a thin layer of immersion gold plating. The plating method results in a flat surface finish that is great for assembly rework on quite specific components.
- ENIG works best for BGA components due to the flat finish. If your design is mostly through hole components, or at least don´t have critical BGA components, ask your PCB manufacturer how much you could save if you switched to a LF-HAL surface finish.
Adapting to changes in supply chain will help you to maximize profit without sacrificing quality. There will always be nuanced questions. Feel free to reach out to your local NCAB office if you’d like to discuss further.
Harry Kennedy is a field application engineer at NCAB Group.
More Columns from Fresh PCB Concepts
Fresh PCB Concepts: Navigating Supply Chain Security and Traceability Through StandardsFresh PCB Concepts: Fostering Loyal Relationships with PCB Design Engineers
Fresh PCB Concepts: Sustainable PCBs—Raw Materials and Compliance Methods
Fresh PCB Concepts: The Pros and Cons of Gerber, ODB++, IPC-2581
Fresh PCB Concepts: PCBs for Harsh and Extreme Environments, Part 2
Fresh PCB Concepts: PCBs for Harsh and Extreme Environments, Part 1
Fresh PCB Concepts: Designing Controlled Impedance PCBs
Fresh PCB Concepts: Copper Coin for Dissipating Heat